Skip to content

RPG Radar SOP

Step by step SOP for starting up the radar from scratch, starting the software, and powering back down again. Please add more detail to this as and when it comes up. Hopefully much of this will be automated eventually.

Power up

Once the AC power has been turned on per the AC Power Control SOP, make sure the radar is working correctly by:

1) On the windows machine, make sure the radar software is open (open it if it is not) 2) Make sure the software can connect to the radar (the top left hand corner where it says 'server' should not say 'connection lost' or something along those lines) 3) Make sure the MBF it's running is correct, top right, it should say 'No batch --> AURORA_xxxx Sampling'. If you need to send a new MBF, send the latest AURORA .MBF file. 4) Make sure the blower is on automatic: Select the 'system control' tab, and set the blower to 'automatic' and 'send to radar' 5) Check the data is being saved in the D:/ directory (apparently this can change randomly sometimes.)

Power down

Before turning the AC off, follow these steps to shut down the radar nicely:

1) Set the blower to 'always off' following the inverse of the steps above. 2) Use the the 'measurement' menu to 'terminate measurement' 3) Once the measurement is terminated, close the software. 4) Now you can go ahead and turn off the AC.

Troubleshooting

Access to the radar computer

On the windows machine you can access the radar computer directly using Remote Desktop, and this is useful fo some things. Neely to add more information here.