Skip to content

RPG MWR SOP

Step by step SOP for starting up the HATPRO from scratch, starting the software, and powering back down again. Please add more detail to this as and when it comes up. Hopefully much of this will be automated eventually.

Power up

Once the AC power has been turned on per the AC Power Control SOP, make sure the hatpro is working correctly by:

1) On the windows machine, make sure the hatpro software is open (open it if it is not) 2) Make sure the software can connect to the hatpro (message in the bottom left hand corner should say 'radiometer connect') 3) Make sure the MBF it's running is correct, the current 'MDF' should be AURORA_xxxx. If you need to send a new MBF, send the latest AURORA .MBF file. Note that this triggers (every hour?) so that if you're outside of this time you might be waiting for it to trigger on the top of the next hour before you see any data come in.
4) Check all the lights on the status and config tab are green. 5) Check the data is being saved in the D:/ directory (apparently this can change randomly sometimes.)

Power down

Before turning the AC off, follow these steps to shut down the hatpro nicely:

1) Use the the 'measurement' menu to 'terminate running batch' 2) Once the measurement is terminated, close the software. 3) Now you can go ahead and turn off the AC.

Troubleshooting

Access to the hatpro computer

On the windows machine you can access the hatpro computer directly using Remote Desktop, and this is useful fo some things. Neely to add more information here.